Dash Cam Won’t Stick To Windshield? Try These Methods

Updated on June 20, 2023

Have you recently purchased a dash cam to keep an eye on your car while you’re away, only to find out it won’t stick to the windshield? Don’t worry – this is a common problem. It’s likely that you didn’t properly prepare the surface or use the correct technique for securing it. In this article, we’ll walk through some of the reasons why your dash cam won’t stick and provide tips for keeping it in place. We’ll also discuss how to troubleshoot any common problems so you can get your dash cam up and recording as soon as possible!

Reasons Why Your Dash Cam Won’t Stick

There could be a few reasons why your driving recorder isn’t clinging to the glass – let’s take a look! There are two primary causes for this issue – either you need to clean the surface more thoroughly or you need to use a stronger adhesive. If the windshield is not clean, then it can cause sticking issues as dirt and dust particles can prevent the camera from adhering properly. Make sure that you wipe down all surfaces with a dry cloth before attempting to attach your dash cam.

Additionally, some manufacturers may have lower quality adhesives than others, which could also explain why your dash cam won’t stick. To solve this problem, try using an adhesive of higher quality on your windshield, such as one that has been specifically designed for car mounting purposes. Make sure that you follow the instructions correctly and allow enough time for the adhesive to set before attaching your driving recorder.

No matter what method you choose, proper preparation is key! Cleaning away any dirt or debris from the surface will give your camera better grip and ensure it stays securely in place while driving. Additionally, choosing an appropriate adhesive will increase its overall sticking power so that it does not come loose in hot or cold weather conditions.

Preparation Tips

Struggling to get your car camera to stay in place? Don’t worry, these preparation tips will help you mount it securely! Before attaching a dash cam to your windshield, there are a few things you should do:

• Remove any dirt, dust, or debris from the windshield.
• Use an alcohol-based cleaner and a lint-free cloth or microfiber towel for best results.
• Avoid extreme temperatures when applying adhesive mounting components.
• If it’s too cold outside, warm up your car before you start.

These tips can help ensure that your dash cam is properly secured and won’t fall off while you’re driving. To maximize the longevity of the adhesive components, make sure to clean them regularly with soap and water. With some simple preparation and maintenance steps, you can enjoy peace of mind knowing that your dash cam is mounted securely!

Techniques for Securing the Dash Cam

Securing your car camera isn’t always easy, but with the right techniques you’ll be able to get it firmly in place. Adhesive types and mounting solutions are essential for making sure that your dash cam won’t come loose or fall off while you’re driving. The most common adhesive type is a 3M adhesive tape which can easily be attached to your windshield. You may also want to consider using suction cups, magnetic mounts, or double-sided tape for extra stability.

Another important factor to consider when securing your dash cam is the location of the mount on your windshield. Make sure that the mount is placed in an area where it won’t block your view. Additionally, make sure that you use a strong adhesive and check regularly to make sure that it’s still secured properly. If you find that the mount has come loose, simply reapply more adhesive until it’s secure again.

When installing a dash cam, it’s important to take all necessary precautions and follow directions carefully so that you don’t end up with an unstable device on your windshield. Following these steps will help ensure that your dash cam stays securely in place during any driving conditions!

Tips for Keeping Your Dash Cam in Place

You want to make sure your car camera stays put, so be sure to take the right steps when installing it for maximum security! There are various methods of mounting dash cams, from adhesive mounts to suction cups. Consider the best option for your vehicle:

1. Adhesive Mounts – these require a special adhesive that is designed for car windows and surfaces. Make sure you choose an appropriate adhesive type that will securely hold your camera in place and won’t damage the windshield or paintwork.
2. Suction Cups – these can be a good choice if you want a more temporary solution as they are easy to install and remove without leaving any residue on the surface. However, it’s important to check regularly that the suction cup is firmly attached as it can become loose over time due to temperature changes or vibration from travelling on rough roads.
3. Magnetic Mounts – these work by attaching a magnet onto the surface of your car before placing a metal disc onto your dash cam unit itself which then attaches securely onto the magnet when in place. This method ensures a secure fit with no risk of damaging your windscreen or paintwork but may not always be suitable depending on where you plan on placing your camera.

No matter what method you decide on, make sure you take care when positioning and fitting your dash cam so that it won’t obstruct any part of your view while driving; this could lead to serious safety issues such as collisions or near misses! Additionally, double-check all connections before setting off on any journey and keep an eye out for signs that something might have come loose during transit such as vibration noises coming from inside the vehicle.

Troubleshooting Common Problems

Having trouble with your car camera? Don’t worry – here are some tips to help you troubleshoot any common issues. If your dash cam won’t stick to the windshield, make sure you’re using one of the recommended installing methods and clean techniques. For example, if you’re using a suction cup for mounting, it’s important that you wipe down both the windshield and the suction cup with an alcohol-based cleanser before attaching them together. This will ensure no dirt or dust particles interfere with the adhesion process.

Another issue you may encounter is poor adhesion due to extreme hot or cold temperatures. In this case, try moving your dash cam to a more temperate area of your vehicle during summer or winter months. You can also use double-sided tape as an alternative mounting method in extreme conditions for extra security and stability.

If all else fails, consider purchasing a special adhesive mount designed specifically for safely securing your dash cam on vehicles with extreme temperatures or difficult surfaces such as leather seats or plastic dashboard trims. With these tips in mind, you’ll be able to get your car camera up and running in no time!

Conclusion

It’s no fun when your dash cam won’t stick to the windshield. But with a few simple tips, you can get it secured and keep it there. Start by making sure the suction cup is clean and free of dust or debris. Then use warm water to help create a vacuum seal between the suction cup and windshield. If that doesn’t work, try using some double-sided tape or reusable adhesive strips for extra security. With these tips, you can be sure your dash cam will stay in place so you can drive without worry!